Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

MixEmergency Plug-Ins

edited November 2009 in MixEmergency
If you're unsure of how to install or remove plug-ins, check the Plug-in section of the manual: http://www.inklen.com/mixemergency/manual/plugins/

New plug-ins can be downloaded from: http://www.inklen.com/mixemergency/plugins/

In the coming weeks we will be releasing new plug-ins every week as our "Plug-in of the Week!".
«1

Comments

  • edited September 2010
    Our first new plug-in of the week is the Zoom Fade transition, which is available for download now.

    Zoom Fade is a transition that zooms in the outgoing channel while fading in the incoming channel.

    Parameter 1: The amount that the outgoing channel is scaled, allowing you to create anything between gentle and dramatic transitions.
  • edited September 2010
    Flip Strips H plug-in is up now.

    Flip Strips H is a transition that flips a number of 3D segments horizontally.

    Parameter 1: The number of strips.
  • edited December 2009
    NIck, nice looking effect!
  • edited 11:25PM
    Thanks.
  • edited September 2010
    This week's plug-in is Spectrum Smooth Mask.

    Spectrum Smooth Mask is an effect that masks the output with the current audio spectrum for the channel.

    Parameter 1: Adjusts the audio spectrum gain.
    Parameter 2: Offset of the audio spectrum mask.
  • edited September 2010
    Plug-in #8: Scale H

    Scale H is a transition effect that scales the incoming and outgoing channels relative to their current mix. The scaling maintains the aspect ratio of both channels. One advantage of this type of transition is that the full output of both channels is visible on screen at once.
  • edited September 2010
    Plug-in #9: Reflective Swap

    Reflective Swap is a transition effect that rotates and moves the outgoing channel back, while bringing forward the incoming channel. Each channel has an added reflection to create the illusion of the channels sitting on a shiny surface.

    Parameter 1: Controls the perspective.
  • edited September 2010
    Plug-in #10: Two Up H

    Two Up H is a transition effect that allows both channels to be visible at the same time. It does this by scaling and cropping each channel.

    Parameter 1: Scale.
  • edited September 2010
    Plug-in #11: Spectrum 3D Surface

    Spectrum 3D Surface is a channel effect that warps a 3D surface by an amount determined by the spectral analysis of the currently playing media.

    Parameter 1: The amount that the surface is warped by.
    Parameter 2: Controls the direction in which the spectrum is applied to the surface.
  • edited September 2010
    Plug-in #12: Push Warp H

    Push Warp H is a transition effect similar to the Slide transition - but with a twist.

    Parameter 1: Adjusts the intensity of the warping.
  • edited September 2010
    Plug-in #13: Wipe Out V

    Wipe Out V is a transition effect that performs a wipe transition that starts in the center and moves outwards vertically.

    Parameter 1: Adjusts the edges of the Wipe effect between sharp and smooth.
  • edited September 2010
    Plug-in #14: Blur

    Blur is a channel effect that applies a Gaussian blur to the soruce.

    Parameter 1: Adjusts the amount of blur.
  • edited September 2010
    Plug-in #15: Grid 3x3 Sequenced

    Grid 3x3 Sequenced is a transition effect that similar to the Grid effects in MixEmergency. Unlike the previous Grid effects, Grid 3x3 Sequenced uses one of seven pre-defined grid patterns that can be selected using the transition parameter control.

    Parameter 1: Selects the preset grid sequence.
  • edited September 2010
    Plug-in #16: Delay

    Delay is a channel effect that allows you to delay the video output.

    Parameter 1: The delay time. At the maximum setting the delay is half a second.
    Parameter 2: The first half controls the dissolve amount between the original video and the delayed video. The second half of the Parameter 2 control allows you to change between four extra blend modes.
  • edited September 2010
    Plug-in #17: Center Slide H

    Center Slide H is a transition effect that is a combination of a Slide and Wipe transition. This allows the center (often the focus) of both videos to be displayed during the transition.
  • edited September 2010
    Plug-in #18: Fall Back

    Fall Back is a transition effect that reduces the scale and rotates the current outgoing image.

    Parameter 1: Adjusts the amount of rotation applied during the transition.
  • edited September 2010
    Plug-in #19: Grid Flip

    Grid Flip is a transition effect that separates the outgoing channel into a number of squares and flips them to reveal the incoming channel. The flip order is randomly assigned each time the transition completes a transition from one side to the another.

    Parameter 1: Adjusts the number of squares to divide the image into.
  • edited September 2010
    Plug-in #20: Spectrum Panels 8

    Spectrum Panels 8 is a channel effect that separates the channel's output into 8 panels and resizes them based on the audio spectrum of the currently playing music.

    Parameter 1: Adjusts the gain applied to the audio spectrum.
    Parameter 2: Adjusts the initial starting size of each panel.
  • edited September 2010
    Plug-in #21: Fall

    Fall is a transition effect that rotates forward the outgoing channel to reveal the incoming channel. It also darkens the outgoing channel to give the illusion of lighting within the 3D environment.
  • edited September 2010
    Plug-in #22: Gloom

    Gloom is a channel effect that dulls the highlights of the image.

    Parameter 1: The radius of the effect.
    Parameter 2: The intensity of the effect.
  • edited September 2010
    Plug-in #23: Bloom

    Bloom is a channel effect that applies a pleasant glow to the image.

    Parameter 1: The radius of the glow.
    Parameter 2: The intensity of the glow.
  • edited 11:25PM
    #24 - 'Shroom - gives an effect like the user is on 'shrooms
    #25 - Vroom - effect like you're driving in a car
    #25 - Broom - um.....same effect as #23 but for Japan users =P (sorry so lame)
    #26 - Vacuum - this effect sucks.
    #27 - Doom - end of the world effect
    #28 - Loom - blanketing effect
    #29 - Boom - makes video...um..."bass-ier"
    #30 - Groom - cleaning like effect


    ok. i'm done for now. got it out of my system. sorry for cluttering the thread. back to work...
  • edited 11:25PM
    haha
  • edited 11:25PM
    hmmmm, I'm seriously considering making a Shroom plug-in now....
  • edited September 2010
    Plug-in #24: Wipe Out H

    Wipe Out H is a transition effect that performs a wipe transition that starts in the center and moves outwards horizontally.

    Parameter 1: Adjust the edges of the Wipe effect between sharp and smooth.
  • edited May 2014
    Plug-in #25: Cut Strips H

    Cut Strips H is a transition effect that segments both channels into vertical strips. Each strip performs a cut from the outgoing channel to the incoming channel as the transition progresses.

    Parameter 1: Adjusts the number of vertical strips used for the transition.
  • edited September 2010
    Plug-in #26: Spinning Cube

    Spinning Cube is a transition effect that displays both channels on the sides of a 3D spinning cube.

    Parameter 1: Adjusts the speed at which the cube spins.
  • edited September 2010
    Plug-in #27: Hue Pass

    Hue Pass is a channel effect that only displays colours within a specified range. It can be thought of as the colour equivalent of an audio band-pass filter.

    Parameter 1: Allows you to select the hue to display (the center hue).
    Parameter 2: Allows you to adjust the range of hues to display around the center hue.
  • edited September 2010
    Plug-in #28: Ripple

    Ripple is a channel effect.

    Parameter 1: The depth of the Ripple effect.
    Parameter 2: The width of the Ripple effect.
  • edited September 2010
    Plug-in #29: Iris Warp

    Iris Warp is a transition effect similar to the Iris transition. However, the Iris Warp transition warps the outgoing channel around the incoming channel.
  • edited September 2010
    Plug-in #30: Lens Distortion

    Lens Distortion is a channel effect that distorts the channel's output image.

    Parameter 1: The amount of distortion.
    Parameter 2: The offset for the red, green and blue channels.
  • edited September 2010
    Plug-in #31: Ripple Dissolve

    Ripple Dissolve is a transition effect that warps and dissolves the output image of each channel.

    Parameter 1: The amount of distortion.
  • edited September 2010
    Plug-in #32: Bad TV

    Bad TV is a channel effect that produces output similar to that of a television with poor reception.

    Parameter 1: The amount of distortion.
    Parameter 2: Mix of the scan-lines.
  • edited September 2010
    Plug-in #33: Ripple RGB

    Ripple RGB is a channel effect similar to the Ripple effect. However, Ripple RGB applies a separate ripple effect to the red, green and blue channels.

    Parameter 1: The depth of the ripple.
    Parameter 2: The width of the ripple.
  • edited September 2010
    Plug-in #34: Spectrum Line

    Spectrum Line is a channel effect that overlays the channel with a coloured line representing the channel's audio spectrum.

    Parameter 1: Gain to apply to the spectrum.
    Parameter 2: The colour of the line.
  • edited September 2010
    Plug-in #35: Lens Distortion 2

    Lens Distortion 2 is a channel effect that distorts the channel's output image.

    Parameter 1: Controls the amount of distortion.
    Parameter 2: Offsets the distortion in the red, green and blue channels.
  • edited September 2010
    Plug-in #36: Spinning Cube 2

    Spinning Cube 2 is a transition effect similar to the Spinning Cube transition. The difference between the transitions is that Spinning Cube 2 slightly zooms out/in during the start/end of the transition.

    Parameter 1: Controls the speed at which the cube spins.
  • edited September 2010
    Plug-in #37: Center Slide V

    Center Slide V is a transition that combines both the Slide and Wipe transitions. This is useful as it allows the center of the two channels (often the primary focus) to be visible throughout the entire transition.
  • edited September 2010
    Plug-in #38: Gradient Overlay

    Gradient Overlay is a channel effect that overlays a gradient on the currently playing video.

    Parameter 1: Selects the preset gradient.
    Parameter 2: Shifts the hue for that gradient.
  • edited September 2010
    Plug-in #39: Bad TV Switch

    Bad TV Switch is a transition effect that applies the Bad TV effect across the transition.

    Parameter 1: Adjusts the amount of distortion.
  • edited September 2010
    Plug-in #40: Cartoon

    Cartoon is a channel effect that makes your videos look like cartoons.

    Parameter 1: Adjusts the width of the cartoon outlines.
    Parameter 2: Adjusts the colour saturation.
  • edited September 2010
    Plug-in #41: Additive Blend

    Additive Blend is a transition effect that dissolves between a channel and the sum of both channels.
  • edited September 2010
    Plug-in #42: Fall Back SE

    Fall Back SE is a transition effect similar to the previous Fall Back transition. However, the SE plug-in allows you to layer multiple cuts with the crossfader. Each time the crossfader moves away from an edge it triggers the Fall Back animation and captures the current image of that channel.

    Parameter 1: The amount of rotation applied to the outgoing channel image.
  • edited October 2010
    Plug-in #43: Smash SE

    Smash SE is a transition effect that smashes the outgoing channel into a number of pieces to reveal the incoming channel. The plug-in allows you to layer multiple cuts with the crossfader.

    Parameter 1: Controls the number of pieces that the outgoing channel image is divided into.
  • edited 11:25PM
    These plugins are AWESOME. Keep up the great work :)
  • edited 11:25PM
    :) Thanks
  • edited September 2010
    Plug-in #44: Cube Rotate

    Cube Rotate is a channel effect that displays the channel image on a rotating cube.

    Parameter 1: Speed and direction of the rotation.
    Parameter 2: Distance of the cube from the channel view point.
  • edited September 2010
    Plug-in #45: Spectrum Panels 3

    Spectrum Panels 3 is a channel effect that separates the channel's output into 3 panels and
    resizes them based on the audio spectrum of the currently playing music.

    Parameter 1: Audio spectrum gain.
    Parameter 2: Adjusts the initial starting size of each panel.
  • edited 11:25PM
    Is there anyplace we can find the detailed descriptions of all the past plug-ins?

    Looks like that description is given for only the most recent one.
  • edited 11:25PM
    Not yet. Someone else was asking for this a while ago too. For now, perhaps I can update this thread with all the info.
  • edited 11:25PM
    Thanks very much for all that...and for the great plugins of course.
  • edited 11:25PM
    Excellent, i was going to ask the same thing :)
  • edited 11:25PM
    Plug-in #46: Psychedelic

    Psychedelic is a channel effect that applies a wave warp and cycles the hue of the channel's output.

    Parameter 1: Adjusts the amount of warping.
    Parameter 2: Adjusts the colour saturation.
  • edited 11:25PM
    so would this be the 'shroom plug-in?
  • edited 11:25PM
    haha.... yes
  • edited 11:25PM
    Plug-in #47: Smash SE 2

    Smash SE 2 is a transition effect that smashes the outgoing channel into a number of pieces to reveal the incoming channel. It differs from the Smash SE plug-in by using an additive blend to overlay the outgoing channel and the smashed channel's pieces do not fall away. The plug-in allows you to layer multiple cuts with the crossfader.

    Parameter 1: Controls the number of pieces that the outgoing channel image is divided into.
  • edited 11:25PM
    Plug-in #48: TV Dream

    TV Dream is a transition effect that distorts and dissolves between the incoming and outgoing channels.

    Parameter 1: Controls the intensity of the distortion.
  • edited 11:25PM
    Plug-in #49: Halloween

    Halloween is a transition effect transitions between channels using one of four Halloween themed masks.

    Parameter 1: Selects the mask to use.
  • edited 11:25PM
    Plug-in #50: Slide Strips V

    Slide Strips V is a transition effect that slides alternating strips of the incoming and outgoing channels up and down.

    Parameter 1: Controls the number of strips.
  • edited 11:25PM
    Plug in 49 halloween Is there a way to add our own mask?
  • edited 11:25PM
    No, there isn't.
  • edited 11:25PM
    Plug-in #51: Squares

    Squares is a channel effect similar to the Pixellate effect.

    Parameter 1: Controls the pixellated area size.
    Parameter 2: Controls the square size within that area.
  • edited 11:25PM
    Plug-in #52: Grid 3x3 Strobe

    Grid 3x3 Strobe is a transition effect that combines the Grid and Strobe transitions.

    Parameter 1: Controls the strobe frequency.
  • edited 11:25PM
    Plug-in #53: Comic Call

    Comic Call is a transition effect that combines a slide and wipe transition.
  • edited 11:25PM
    Plug-in #54: Two Up H SE

    Two Up H SE is a transition effect designed for scratching and beat juggling. The transition displays both channels at once. When the crossfader is shifted to either edge, the corresponding channel is dimmed. When the crossfader moves from one edge to another, the previous channel's image is captured and an animation, that rotates and translates the image forward, is triggered.

    Parameter 1: Controls the scale of each channel.
  • edited 11:25PM
    Plug-in #55: Iris SE

    Iris SE is a transition effect similar to the Iris transition. However, Iris SE allows you to layer multiple cuts with the crossfader and freezes the outgoing channel.
  • edited 11:25PM
    DUDE...THIS ONE IS AMAZING!

    if you do a twiddle, or a crab the screen goes bonkers with fader movement rings...

    top shelf!
  • edited 11:25PM
    Thanks :)
  • edited 11:25PM
    Plug-in #56: Spectrum Grid 3

    Spectrum Grid 3 is a channel effect that divides and displays the incoming audio spectrum in 3 bands.

    Parameter 1: Adjusts the audio specturm gain.
    Parameter 2: Adjusts the size of each block in the grid.
  • edited 11:25PM
    hey nick. think it would be great to have a flip h strobe and a flip v strobe. can this be done>?
  • edited 11:25PM
    and also with ur bad tv switch. can u make another one where ur still just a bit past the 50 percent marker of the crossfader. that it will stop the effect of the bad tv?
  • edited 11:25PM
    i like the idea of the comic call. can u add boxes to it like a comic book?
  • edited 11:25PM
    can we also have a flip strips h strobe as well...
  • edited 11:25PM
    and on the slide strips v. when the crossfader is in the middle..

    is there a way to keep the videos moving ? that way they are not in the same place. they just constantly move untill the crossfader is all the way over...
  • edited 11:25PM
    I can't really imagine what you mean by a Flip H/V strobe transition.

    For the Bad TV - sounds interesting - will consider it.

    Regarding "Comic Boxes" - I've been thinking of something similar - will have to see how well it works.

    And for Slide Strips V - I guess what you're after is some sort of effect that looks like a slot machine.
  • edited 11:25PM
    i think with the comic book effect. it would be nice to have it strobe like the 3x3 sequencer. make the comic book boxes move around. like its alive ?
  • edited 11:25PM
    in the flip h and flip v. the screen will keep moving/turing around untill the fader is all the way over...
  • edited 11:25PM
    most of the time i will have the fader in the middle untill im done with the mix. so that might be 18-36 seconds of no video with the flip or v transition..
  • edited 11:25PM
    it would like the spinning cube..
  • edited 11:25PM
    sorry i havent gone thru the effects or transitions in a while(but im getting ready for this new club) but i noticed with with brightness that u can make the screen go white. is there a way assign a midi button to just make the screen flash white. like maybe a strobe light effect. so basically when we hit the button the output screen goes white?
  • edited 11:25PM
    You could set up the effect so that the screen is white, then map a MIDI button to the wet/dry mix. When you push the button it will toggle the wet/dry mix of effect between 0 and 100%.
  • edited 11:25PM
    thats true. didnt think about that.
  • edited 11:25PM
    also. can u make transition with the cube rotate effect?
  • edited 11:25PM
    Nick, who develop this plugin? is that you?
  • edited 11:25PM
    Yes - I develop the plug-ins.
  • edited 11:25PM
    Hey Nick,

    Video Effect Request: Anaglyph aka 3D

    Thanks
    Deejay Callen
  • edited 11:25PM
    Yeah - could do that. It would only look as though the 2d image was moving forward/backward though, as it could never automatically recreate the 3d scene.
  • edited 11:25PM
    Just looking for something similar to the one in VSL. Want to do a 3D glasses night.
  • edited 11:25PM
    hey nick
    can we get some transtions like in ths mixed video

    u see how the videos turn around. i would like to see something like that. but soemthing that keeps spinning around when ur in the middle of the crossfader...

    check out 3:04 to 3:10
    http://www.vdjbig.com/big/sc.html
  • edited 11:25PM
    Yeah - I guess so. It's not that different to the Spinning Cube plug-ins (i.e. it's basically a cube but with the sides shifted outwards).
  • edited 11:25PM
    it's almost like the one i was telling u about nick...just with out 4 screens just the 2..one for each channel
  • edited 11:25PM
    it's short but 3:08 to 3:10 how one screen is floating over the other one...can u dig it
  • edited 11:25PM
    i like it. but i think the background should be black...
  • edited 11:25PM
    Yeah, Thats a dope transition above!

    Loving your work Nick! The quality of ME is awesome! Don't know why it took me so long to buy it!

    Cant wait for 1.6 :)

    Cheers!
  • edited 11:25PM
    3:23 to 3:26 has another nice transition :)

    http://www.vdjbig.com/big/sc.html

    Do you know what program is he using Henry? :)
  • edited 11:25PM
    thats kinda like the spinning cube... but no it might be soemthign inside of final cut pro
  • edited 11:25PM
    Plug-in #57: Smash

    Smash is a transition effect that smashes the outgoing channel into a number of pieces to reveal the incoming channel.

    Parameter 1: Controls the number of pieces that the outgoing channel image is divided into.
  • edited 11:25PM
    Plug-in #58: Hexagonal Pixellate

    Hexagonal Pixellate is a channel effect that divides the channel into a number of coloured hexagons.

    Parameter 1: Controls the size of the hexagons.
  • edited 11:25PM
    WOOHOOO!!!! thanks!!
  • edited 11:25PM
    ^ hehe, that's the kind of enthusiasm I like to see :)
Sign In or Register to comment.